Menu
Menu

Compact Filter GV8 (F6 – F9)

Finedust Prefilter Designed for Highest Necessities in Gas Turbine Applications

Properties

The side covers of the filter are made from rigid plastic with integrated water outlet slopes on both the up and down stream sides. Connection slots for the insertion of the pre-filter frame HFA-# are also included. These features, in combination with the reinforced profiles, provide maximum space for the filter media pack and obtain a high mechanical strength. The fibreglass media pleated in ‘mini-pleat shape’ can be reinforced with an additional plastic rib that is cast with polyurethane sealant in V-shape technology directly into the side cover. This design provides a very high burst pressure in correlation with maximum dust holding capacity, low pressure drop, and safe removal of condensate water. The filters are supplied with a flat flange and endless gasket creating a secure seal between the filter and each standard pre-filter holding frame.

Testing

The filters are tested in accordance with the European standard EN 779 (Particulate air filters for general ventilation). This standard is based on ASHRAE 52.1¹ ¹Gravimetric and Dust-Spot Procedures for Testing Air Cleaning Devices Used in General Ventilation Removing Particulate Matter 1992

Features
  • Efficiencies of 60% up to 98% (ASHRAE 52.1)
  • High quality micro fibreglass media
  • Lowest initial pressure drop
  • Highest dust holding capacity
  • High burst pressure (>3000Pa / 2000/Pa)
  • Rigid full plastic frame
  • Filter height only 292mm
  • High quality standard due to Quality Assurance System
  • Highly economical through high final pressure drop
  • Usable in two flow directions
  • Endless Gasket (optional)
  • Filter tested according to EN 779 (based on ASHRAE 52.1)
Standards
  • EN 779
  • ASHRAE 52.1
  • ISO 9001:2000

The GV8 Full Plastic compact prefilter is designed for highest necessities in Gas Turbine applications. Each GV8 Full Plastic Filter contains eight (8) ‘Minipleats-Media Packs’ cast in V-shape technology to achieve the lowest pressure drop results, the highest dust holding capacity, and maximum burst pressures.

Copyright @ Beth-El Amerika LLC.

Products | Air Filtration Systems

Products | Filtration Systems Accessories

Distribution | Special Filters

Any filter customization is always welcome.
Please contact sales department.

Distribution | Air Treatment Systems

Manufacturing | Room Air Purification systems

Aura Air system installed on wall

Room Air Purification system

mini personal portable air purifier

Personal Air Purification system

The Room Air Purification Systems are manufactured in collaboration with the production and assembly lines of Beth-El Industries, which also distributes the product.

Manufacturing | Integration & Testing

Beth-El America LLC offers strong integration and testing capabilities in mechanical and electro-mechanical systems.

We have the advantage of in-house engineering, R&D capabilities, and high quality production facilities, partners and subcontractors operating in compliance to the highest standards like ISO 9001:2015 and AS9100D quality management system.

Manufacturing | Turnkey Solutions

We offer full turnkey solutions including procurement, subcontracting, incoming inspections, integration and assembly, QUAL, FAI, testing and ATPs, packing and shipment.

Products
Engine Air Cleaners
Air Filtration Systems

Products | Air Filtration Systems

Filtration systems
Accessories

Products | Filtration Systems Accessories

Distribution
Air Treatment Filters
Special Filters

Distribution | Special Filters

Any filter customization is always welcome.
Please contact sales department.
Air Treatment
System

Distribution | Air Treatment Systems

Manufacturing
Room Air Purification system

Manufacturing | Room Air Purification systems

Aura Air system installed on wall

Room Air Purification system

mini personal portable air purifier

Personal Air Purification system

The Room Air Purification Systems are manufactured in collaboration with the production and assembly lines of Beth-El Industries, which also distributes the product.

Integration & Testing

Manufacturing | Integration & Testing

Beth-El America LLC offers strong integration and testing capabilities in mechanical and electro-mechanical systems.

We have the advantage of in-house engineering, R&D capabilities, and high quality production facilities, partners and subcontractors operating in compliance to the highest standards like ISO 9001:2015 and AS9100D quality management system.

Turnkey Solutions

Manufacturing | Turnkey Solutions

We offer full turnkey solutions including procurement, subcontracting, incoming inspections, integration and assembly, QUAL, FAI, testing and ATPs, packing and shipment.

Thank you for your interest

Articles

About us - magazines and websites...